Isibani sephaneli esiyisicaba se-LED esingu-125lm/w esingu-30W esingu-2x2ft esingu-1-10V esicwebezelayo se-UL CUL LED Flat Panel Isithombe Esivelele

Isibani sephaneli esiyisicaba se-LED esingu-125lm/w esingu-30W esingu-2x2ft esingu-1-10V esikhanyiswayo se-UL CUL LED Flat Panel Light

Ukwakheka kwezindawo zokwakha kuhlanganisa izici zokukhanya ngezinjongo zokuhlobisa noma zokusebenza. Ngokukhanya okuvaliwe, iningi lesistimu yokukhanyisa libekwe ngemuva noma livalwe endaweni noma isici sokwakha (njenge-soffit). Ukuthuthukiswa kwamaphaneli e-LED akhanyiswe ngomphetho kuhambisana nokulinganisa ubudlelwano bezici ezingenhla ukuze kufezwe into edala ukukhanya okubonakala kuhambisana neso lomuntu kulo lonke iphaneli ye-diffuser.

Into:Isibani sephaneli se-LED esingu-2x2ft

Amandla:30W /40W /50W

I-Voltage yokufaka:I-AC100-277V, 50-60Hz

Izinga Lokushisa Lombala:3000K /4000K /5000K /6000K

Isikhathi Sokuphila:Amahora angu-≥60000

Sithumelele i-imeyili Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela Wokufaka

Icala Lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 2x2I-LEDIphaneliUkukhanya30W.

•Ukusebenza kahle kokukhanya kungu-100 lm/w-125lm/w ukuze kongiwe amandla afinyelela ku-50% uma kuqhathaniswa nezinto ezivamile zokukhanyisa ezikhanyayo.

•Iphrofayili ephansi enhle (uhlaka oluncane kakhulu oluyi-10mm) lwemibono emisha yokuklama ukukhanya.

•Umklamo wesekethe oyingqayizivele ukugwema noma iyiphi inkinga ngokukhishwa kokukhanya okubangelwa noma okuthonywe yi-LED eyodwa enephutha.

•UGR 19 (Unified Glare Rating) - ifanele ukusetshenziswa emahhovisi.

•I-engeli yobubanzi be-beam engu-120° ukuze kusatshalaliswe ukukhanya okulinganayo.

•Ukufakwa okungenazinkinga - kufaneleka ukusetshenziswa kokufakwa okugobile, okulengayo, okungaphezulu noma odongeni.

•Akukho mercury noma ezinye izinto eziyingozi; Akukho ukuphazamiseka kwe-RF.

•Impilo ende kakhulu ifinyelela emahoreni angu-60,000, izikhathi eziyishumi kunesibani sendabuko sokonga amandla.

•Kuvunyiwe i-UL CUL DLC kanye ne-FCC.

2. Imininingwane Yomkhiqizo:

Inombolo Yemodeli	PL-2x2-30W-100	PL-2x2-30W-125	I-PL-2x2-40W-100	I-PL-2x2-40W-125	I-PL-2x2-50W-100
Imodeli ye-UL/DLC	I-ET-22-30WD-100	I-ET-22-30WD-125	I-ET-22-40WD-100	I-ET-22-40WD-125	I-ET-22-50WD-100
Ukusetshenziswa Kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	603x603x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga Lokushisa Lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux (Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Angle ye-Beam (izinga)	>120°
I-CRI	>80
Isici Samandla	>0.9
Indawo Yokusebenza	Ngaphakathi
Izinto Zomzimba	Uhlaka lwe-Aluminium+ LGP+ PS/PMMA Diffuser
Isilinganiso se-IP	I-IP20
Iyafinyezeka	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho Yokufaka	Uphahla Olugobile/ Olulengisiwe/ Olungaphezulu/Olufakwe Odongeni
Isikhathi sokuphila	Amahora angu-60,000
Iwaranti	Iminyaka emi-5

3. Izithombe Zokukhanya Kwephaneli Ye-LED:

4. ukuhlolwa kokukhanya kwephaneli ye-LED

4. Isibani Sephaneli Ye-LED Isicelo:

Lezi zibani ze-LED ezincane ezisicaba zilungele amahhovisi, izibhedlela, izikole, iminyuziyamu, amagalari, izakhiwo zebhizinisi, izikhungo zezimboni, amakamelo emihlangano, amahholo okwamukela izivakashi, amakhaya, nokuningi.

Iphrojekthi Yokufaka Eqediwe:

7. Isibonelo sokufakwa kwephaneli ye-LED evaliwe

Iphrojekthi Efakwe Ngaphezulu:

8. Isibonelo sokufakwa okufakwe ebusweni

Iphrojekthi Yokufaka Emisiwe:

9. Isibonelo sokufakwa kwephaneli ye-LED elengayo

Iphrojekthi Yokufaka Okufakwe Odongeni:

10. Isibonelo sokufakwa kwephaneli ye-LED efakwe odongeni

Okwedlule: Isibani sephaneli yophahla lwe-UL LED esingu-2×2 2x2ft

Olandelayo: Isibani sephaneli yophahla oluyisicaba se-UL esingu-40W esingu-24x24inch esingu-2′x2′ esifinyezekayo

Umhlahlandlela Wokufaka:

Ngokukhanya kwephaneli ye-LED, kunezindlela zokufaka ezifakwe ophahleni, ezifakwe ebusweni, ezilengisiwe, ezifakwe odongeni njll. zezinketho ezinezesekeli zokufaka ezifanele. Ikhasimende lingakhetha ngokwezidingo zalo.

Ikhithi Yokumiswa:

Ikhithi yokumisa elengayo yephaneli ye-LED ivumela amaphaneli ukuthi alengayo ukuze abukeke kahle noma lapho kungekho khona uphahla lwegridi ye-T-bar yendabuko.

Izinto ezifakiwe ku-Suspended Mount Kit:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi Yohlaka Lokufaka Okungaphezulu:

Lolu hlaka lokukhweza olungaphezulu lufanelekile ukufaka izibani zephaneli ze-Lightman LED ezindaweni ezingenayo igridi yophahla olulengisiwe, njengebhodi le-plasterboard noma ophahleni lwekhonkrithi. Lulungele amahhovisi, izikole, izibhedlela njll. lapho ukukhweza okuphansi kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zohlaka oluya ophahleni. Iphaneli ye-LED ibe isifakwa ngaphakathi. Ekugcineni qedela ukufakwa ngokufaka izinhlangothi ezisele.

Uhlaka lokukhweza olungaphezulu lunobubanzi obanele bokufaka umshayeli we-LED, okufanele ubekwe maphakathi nephaneli ukuze kutholakale ukushabalaliswa okuhle kokushisa.

Izinto ezifakiwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		PL-SMK1233	PL-SMK1263
Ubukhulu Bohlaka	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm X 2 ama-pcs	L610mm X 2 ama-pcs		L1220mm X 2 ama-pcs	L1220mm X 2 ama-pcs
Uhlaka B	L310mm X 2 ama-pcs	L613mm X 2 ama-pcs		L313mm X 2 ama-pcs	L613mm X 2 ama-pcs
	Ama-X 8 ama-pcs
	X 4 ama-pcs		Ama-pcs angu-X angu-6

Iziqeshana zaseNtwasahlobo:

Iziqeshana zentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard enembobo eqoshiwe. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukufakwa okuvalekile kungenzeki khona.

Okokuqala faka iziqeshana zesipilingi kuphaneli ye-LED. Iphaneli ye-LED ibe isifakwa emgodini osikiwe wophahla. Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED bese uqinisekisa ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto ezifakiwe: