30W 36W DLC 1×4 LED Wall Mount Ceiling Panel Ukulungiswa Okukhanyayo 30×120

Ithuthukiswe ngesizukulwane sakamuva sokukhanyisa kwesimo esiqinile kanye nobuchwepheshe bomshayeli we-elekthronikhi, lesi sibani sephaneli ye-LED engu-1′×4′ simi ngaphezu komncintiswano ngokuhlinzeka ngokwakha okusebenza kahle kakhulu okukhanyisa onqenqemeni okwandisa ukusebenza nokuthuthukisa ukonga konke kwamandla.

Into:Ukukhanya Kwephaneli ye-LED engu-1x4ft

Amandla:30W / 40W / 50W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka

Icala lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 1x4I-LEDIphaneliUkukhanya.

•Ukwakheka komzimba omncane kakhulu, ukujiya okungu-10mm;igobolondo le-aluminium - I-aluminium yekhwalithi ephezulu, ukuchithwa kahle kokushisa, i-anodized, i-anti-corrosion.

•I-LED ekhanyiswe onqenqemeni yokufana okumhlophe okuphezulu nokugqama.

•Uhlaka lwe-Aluminium nekhwalithi enhle ye-PS ne-PMMA LGP , ukuhanjiswa okuphezulu.

•Ikhwalithi ephezulu ye-SMD LED chip ifinyelela ukusebenza kahle okuphezulu.

•Ayikho i-EVA Foam efakiwe, ngaphandle kokuthinta ukusebenza, ukuphepha komlilo kuphakeme.

•Ifrikhwensi ephansi, ukuphuma kokukhanya okuthambile, ukuqabula kokuvalelisa ekungcoleni kokukhanya.

•Ihuku elivikela ukuzamazama komhlaba ngemuva elihlala linamathele kusilingi we-T-Bar.

•Siyimboni, singakwazi ukwenza ngokwezifiso ukukhanya kwephaneli eholwa ngokusho kwamakhasimende.Futhi sihlinzeka ngama-wattages ahlukene ngokwezidingo zamakhasimende.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-1x4-30W-100	PL-1x4-30W-125	PL-1x4-40W-100	PL-1x4-40W-125	PL-1x4-50W-100
Imodeli ye-UL/DLC	ET-14-30WD-100	ET-14-30WD-125	ET-14-40WD-100	ET-14-40WD-125	ET-14-50WD-100
Ukusetshenziswa kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	303x1213x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga lokushisa lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux(Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Beam Angle (degree)	> 120°
CRI	>80
Isici samandla	>0.9
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame+ LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Kufiphele	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Intaba Yodonga
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

I-UL LED Panel Light iyindlela efanelekile yokumiselela izinto ezisebenza ngogesi ezisebenza kahle emahhovisi, ezikoleni, ezivakashini, ekunakekelweni kwezempilo, nakwezinye izimakethe nezinhlelo zokusebenza zezimboni ezidinga ukujula kokufakwa okuncane.

Iphrojekthi yokufaka kabusha:

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

10. 1200x300 ukukhanya kwephaneli eholayo

Iphrojekthi Yokufaka Okufakwa Odongeni:

13. Ikhasimende lethu lase-Austria lifaka ukukhanya kwe-Lightman LED Panel ku-Fitness Paradise Sera

Okwedlule: I-Ultra Slim 30W Square UL LED Surface Panel Light Fixture 1ft x 4ft

Olandelayo: Canada 125lm/w 40W 303×1213 IP65 UL FCC Recessed LED Ceiling Panel Light

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: