Izibani zephaneli yophahla ye-LED engu-30W 36W UL DLC engu-1×4 efinyezekayo engu-30×120 Isithombe Esivelele

Izibani zephaneli yophahla ye-LED engu-30W 36W UL DLC 1×4 ezifinyezwayo 30×120

Yakhiwe ngesizukulwane sakamuva sokukhanyisa okuqinile kanye nobuchwepheshe bokushayela be-elekthronikhi, lesi sibani sephaneli se-LED esingu-1′×4′ simi ngaphezu komncintiswano ngokunikeza ukwakhiwa okukhanyayo okunamandla kakhulu okwandisa ukusebenza kahle kanye nokuthuthukisa ukonga amandla jikelele.

Into:Isibani sephaneli ye-LED esingu-1x4ft

Amandla:30W /40W /50W

I-Voltage yokufaka:I-AC100-277V, 50-60Hz

Izinga Lokushisa Lombala:3000K /4000K /5000K /6000K

Isikhathi Sokuphila:Amahora angu-≥60000

Sithumelele i-imeyili Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela Wokufaka

Icala Lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 1x4I-LEDIphaneliUkukhanya.

•Umklamo womzimba omncane kakhulu, ubukhulu obungu-10mm; igobolondo le-aluminiyamu - I-aluminiyamu esezingeni eliphezulu, ukushabalalisa ukushisa okuhle, i-anodized, ilwa nokugqwala.

•I-LED ekhanyiswe ngomphetho ukuze kube mhlophe kakhulu futhi kube nokukhanya okufanayo.

•Uhlaka lwe-aluminium kanye ne-PS ne-PMMA LGP yekhwalithi enhle, ukudlulisa okuphezulu.

•I-chip ye-LED ye-SMD esezingeni eliphezulu ifinyelela ukusebenza kahle okuphezulu.

•Akukho Foam ye-EVA efakiwe, ngaphandle kokuphazamisa ukusebenza, ukuphepha komlilo kuphakeme.

•Imvamisa ephansi, ukukhanya okukhanyayo okuthambile, ukuvalelisa ekungcoleni kokukhanya.

•Ihhuku elingavimbeli ukuzamazama komhlaba ngemuva elihlala linamathele kahle ophahleni lwe-T-Bar.

•Siyifektri, singenza ngokwezifiso izibani zephaneli ze-LED ngokwezidingo zamakhasimende. Futhi siphinde sinikeze ama-wattage ahlukene ngokwezidingo zamakhasimende.

2. Imininingwane Yomkhiqizo:

Inombolo Yemodeli	I-PL-1x4-30W-100	PL-1x4-30W-125	I-PL-1x4-40W-100	I-PL-1x4-40W-125	I-PL-1x4-50W-100
Imodeli ye-UL/DLC	I-ET-14-30WD-100	I-ET-14-30WD-125	I-ET-14-40WD-100	I-ET-14-40WD-125	I-ET-14-50WD-100
Ukusetshenziswa Kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	303x1213x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga Lokushisa Lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux (Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Angle ye-Beam (izinga)	>120°
I-CRI	>80
Isici Samandla	>0.9
Indawo Yokusebenza	Ngaphakathi
Izinto Zomzimba	Uhlaka lwe-Aluminium+ LGP+ PS/PMMA Diffuser
Isilinganiso se-IP	I-IP20
Iyafinyezeka	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho Yokufaka	Uphahla Olugobile/ Olulengisiwe/ Olungaphezulu/ Olubekwe Odongeni
Isikhathi sokuphila	Amahora angu-60,000
Iwaranti	Iminyaka emi-5

3. Izithombe Zokukhanya Kwephaneli Ye-LED:

5. Isibani sephaneli esisicaba se-LED esingu-1x4

4. Isibani Sephaneli Ye-LED Isicelo:

Izibani zephaneli ze-UL LED ziyizinto ezingcono kakhulu zokufaka esikhundleni ezisebenzisa amandla amaningi ezisetshenziswa ezindaweni ezikhanyisayo emahhovisi, ezikoleni, ezindaweni zokungenisa izihambi, kwezempilo, nakwezinye izikhangiso kanye nasezindaweni zezimboni ezidinga ukujula okuncane kokufakwa.

Iphrojekthi Yokufaka Eqediwe:

Iphaneli yophahla ye-LED engu-8. 300x1200

Iphrojekthi Efakwe Ngaphezulu:

Isibani sephaneli se-LED esingu-10. 30x120

Iphrojekthi Yokufaka Emisiwe:

10. Isibani sephaneli se-LED esingu-1200x300

Iphrojekthi Yokufaka Okufakwe Odongeni:

13. Ikhasimende lethu lase-Austria lifaka isibani se-Lightman LED Panel eFitness Paradise Sera

Okwedlule: Isibani Sokukhanya Sephaneli Yophahla Ye-LED engu-100lmw engu-1×4 Square UL

Olandelayo: Izibani ze-LED Flat Panel ezi-40W 1ftx4ft 303×1213 IP65 ezifinyeziwe

Umhlahlandlela Wokufaka:

Ngokukhanya kwephaneli ye-LED, kunezindlela zokufaka ezifakwe ophahleni, ezifakwe ebusweni, ezilengisiwe, ezifakwe odongeni njll. zezinketho ezinezesekeli zokufaka ezifanele. Ikhasimende lingakhetha ngokwezidingo zalo.

Ikhithi Yokumiswa:

Ikhithi yokumisa elengayo yephaneli ye-LED ivumela amaphaneli ukuthi alengayo ukuze abukeke kahle noma lapho kungekho khona uphahla lwegridi ye-T-bar yendabuko.

Izinto ezifakiwe ku-Suspended Mount Kit:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi Yohlaka Lokufaka Okungaphezulu:

Lolu hlaka lokukhweza olungaphezulu lufanelekile ukufaka izibani zephaneli ze-Lightman LED ezindaweni ezingenayo igridi yophahla olulengisiwe, njengebhodi le-plasterboard noma ophahleni lwekhonkrithi. Lulungele amahhovisi, izikole, izibhedlela njll. lapho ukukhweza okuphansi kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zohlaka oluya ophahleni. Iphaneli ye-LED ibe isifakwa ngaphakathi. Ekugcineni qedela ukufakwa ngokufaka izinhlangothi ezisele.

Uhlaka lokukhweza olungaphezulu lunobubanzi obanele bokufaka umshayeli we-LED, okufanele ubekwe maphakathi nephaneli ukuze kutholakale ukushabalaliswa okuhle kokushisa.

Izinto ezifakiwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		PL-SMK1233	PL-SMK1263
Ubukhulu Bohlaka	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm X 2 ama-pcs	L610mm X 2 ama-pcs		L1220mm X 2 ama-pcs	L1220mm X 2 ama-pcs
Uhlaka B	L310mm X 2 ama-pcs	L613mm X 2 ama-pcs		L313mm X 2 ama-pcs	L613mm X 2 ama-pcs
	Ama-X 8 ama-pcs
	X 4 ama-pcs		Ama-pcs angu-X angu-6

Iziqeshana zaseNtwasahlobo:

Iziqeshana zentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard enembobo eqoshiwe. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukufakwa okuvalekile kungenzeki khona.

Okokuqala faka iziqeshana zesipilingi kuphaneli ye-LED. Iphaneli ye-LED ibe isifakwa emgodini osikiwe wophahla. Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED bese uqinisekisa ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto ezifakiwe: