Izigaba zemikhiqizo
-
Iphaneli Yophahla Ye-LED Eyi-36W 625×625 Elumisiwe L...
-
Iphaneli Yokukhanya Yesilingi Esiyisicaba Esiyi-300×300 Eyehlisiwe ...
-
Isibani sephaneli esiyisicaba se-LED esilengayo esingu-40W 6...
-
Iphaneli yokukhanya ye-LED engu-80W engu-620x620mm ye-Cassette Ceiling
-
Ukonga Amandla 40W 620×620 I-LED Ce egobile...
-
I-40W 67×67 LED Flat Panel Office False Ceil ...
1. Izici Zomkhiqizo zeIsibani sephaneli se-LED esishumekiwe esingu-30x150.
• Igobolondo le-aluminium elisezingeni eliphezulu lisetshenziswe ukuze livumelane nokukhishwa kokushisa kwe-LED nokuqinisekisa ukuthi i-LED ihlala isikhathi eside.
• Isebenzisa amandla kahle, yonga amandla ngo-95% uma kuqhathaniswa nesibani se-grille se-CFL sendabuko.
• Ingancishiswa: Izixazululo zokulawula ukuncishiswa kwe-DALI / 0-10V / TRIAC ziyatholakala.
• Ukusebenza kahle kokukhanya okuphezulu, ukusetshenziswa kwamandla aphansi, ukonga izindleko zamandla ngempumelelo.
• Akukho Mercury, akukho misebe ye-UV noma ye-IR, akukho EMI, akukho luhlaza oluphelele kanye ne-ford focus 3 environmental.
• Isikhathi eside sokuphila, amahora angaphezu kuka-50,000, iminyaka engaphezu kwemi-3 usebenzisa, kunciphisa kakhulu izindleko zokushintsha nokunakekela umthombo wokukhanya.
• Ukuzivumelanisa nezimo okuhle, ukufakwa okulula, kungathatha indawo ngokuphelele yesibani se-grille sendabuko.
• Izibani zephaneli ze-LED ziqinisekiswe yi-CE, ROHS, FCC, TUV, GS, CB, SAA, PSE kanye ne-EMC.
2. Imininingwane Yomkhiqizo:
| Inombolo Yemodeli | PL-30150-36W | I-PL-30150-40W | I-PL-30150-48W |
| Ukusetshenziswa Kwamandla | 36W | 40W | 48W |
| I-Luminous Flux (Lm) | 2880～3240lm | 3200～3600lm | 3840～4320lm |
| Uhlobo lwe-LED | I-SMD 2835 | ||
| Izinga lokushisa lombala (K) | 2700 - 6500K | ||
| Umbala | Okufudumele/Okwemvelo/Okupholile Okumhlophe | ||
| Ubukhulu | 300*1500*10mm | ||
| I-Angle ye-Beam (izinga) | >120° | ||
| Ukusebenza Kahle Kokukhanya (lm/w) | >80lm/w | ||
| I-CRI | >80 | ||
| Isici Samandla | >0.95 | ||
| I-Voltage yokufaka | I-AC 85V - 265V | ||
| Ibanga Lokuvama (Hz) | 50 - 60Hz | ||
| Indawo Yokusebenza | Ngaphakathi | ||
| Izinto Zomzimba | Uhlaka lwe-aluminium alloy kanye ne-PS diffuser | ||
| Isilinganiso se-IP | I-IP20 | ||
| Izinga Lokushisa Lokusebenza | -20°~65° | ||
| Iyafinyezeka | Ongakukhetha | ||
| Isikhathi sokuphila | Amahora angu-50,000 | ||
| Iwaranti | Iminyaka emi-3 noma emi-5 | ||
3. Izithombe Zokukhanya Kwephaneli Ye-LED:
4. Isibani Sephaneli Ye-LED Isicelo:
Isibani sethu sephaneli se-LED sisetshenziswa kabanzi ekukhanyiseni kwezentengiselwano, ekukhanyiseni ihhovisi, ekukhanyiseni isibhedlela, ekukhanyiseni igumbi elihlanzekile njll. Kuthandwa ukufakwa ehhovisi, esikoleni, esitolo esikhulu, esibhedlela, efektri kanye nasesakhiweni sezikhungo njll.
Umhlahlandlela Wokufaka: Kumalambu ephaneli le-LED, uhlaka oluvaliwe oluneziqeshana zentwasahlobo. Lolu ludinga ukusika usayizi wembobo ngokuya ngosayizi wohlaka lwangaphakathi. 
Iziqeshana zaseNtwasahlobo:
Iziqeshana zentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard enembobo eqoshiwe. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukufakwa okuvalekile kungenzeki khona.
Okokuqala faka iziqeshana zesipilingi kuphaneli ye-LED. Iphaneli ye-LED ibe isifakwa emgodini osikiwe wophahla. Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED bese uqinisekisa ukuthi ukufakwa kuqinile futhi kuphephile.
Izinto ezifakiwe:
| Izinto | I-PL-RSC4 | I-PL-RSC6 | ||||
| 3030 | 3060 | 6060 | 6262 | 3012 | 6012 | |
 | X 4 | X 6 | ||||
 | X 4 | X 6 | ||||
Ukukhanyisa Ihhovisi (e-UK)
Ukukhanyisa Igaraji Lamakhasimende (e-USA)
Ukukhanyisa kwe-otel (eShayina)
Ukukhanyisa Igumbi Lenkomfa (eJalimane)
