AC100~277V 50W 2×2 Iphaneli Yesilingi ye-LED Emisiwe Ukukhanya Okufakiwe Isithombe Esifakiwe

AC100~277V 50W 2×2 Ukukhanya Kwephaneli Yesilingi ye-LED Emisiwe

I-Lightman Led Panel Light ifinyelela ku-100 lumens i-watt ngayinye kokokufaka okungu-100-270V okuhlanganisa nomshayeli wamanje ongaziwa njalo we-UL otholakala ku-3000K, 4000k, 5000k kanye ne-6000K Izinketho ezine-0-10V dimming etholakalayo. Iphaneli yesibani esinama-LED iklanywe kahle, isigxivizo esibekwe ngaphakathi esilingini sezinhlelo zokusebenza ezintsha zokwakha noma ukulungisa kabusha izibani ezikhona ze-fluorescent troffer.

Into:Ukukhanya Kwephaneli ye-LED engu-2x2ft

Amandla:30W / 40W / 50W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka

Icala lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 2x2ftI-LEDIphaneliUkukhanya50W.

•I-Ultra-thin 10mm, kusetshenziswa i-Mitsubishi LGP, ukukhanya okuphezulu kakhulu kusebenza kahle ngu-100lm/w, yonga amandla afika ku-70%.

•I-Edge-lit, asikho isithunzi, ingxubevange ye-aluminium engu-6063 enokushabalalisa kahle ukushisa.

•Ngokugqama okuphezulu kwe-SMD2835 LEDs, ilume ngu-100lm/W.

•100-277VAC I-Voltage efaka kakhulu,0-10VDC Dimming Driver.

•Idizayini eyingqayizivele yelungelo lobunikazi, umshayeli ongayedwana, ama-LED amanje okushayela angashintshi ukuze kuqinisekiswe ukuphila okude kakhulu nokubola kokukhanya okuphansi.

•Sebenzisa ukukhanya okuphezulu okuphezulu kwe-chip ye-CRI SMD 2835, ubude bempilo amahora angu-60,000, Isiqinisekiso Seminyaka engu-5.

•I-Engeli ekhanyayo yama-degree angu-120, Indawo enkulu yokukhanyisa; I-Led Driver enembayo ephezulu engashintshi, ayicwayizi.

•Ukuqala okusheshayo, akukho ukucwayiza, akukho msindo, akukho-UV, akukho ukuhola.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-2x2-30W-100	PL-2x2-30W-125	PL-2x2-40W-100	PL-2x2-40W-125	PL-2x2-50W-100
Imodeli ye-UL/DLC	ET-22-30WD-100	ET-22-30WD-125	ET-22-40WD-100	ET-22-40WD-125	ET-22-50WD-100
Ukusetshenziswa kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	603x603x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga lokushisa lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux(Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Beam Angle (degree)	> 120°
CRI	>80
Isici samandla	>0.9
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame+ LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Kufiphele	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Udonga Lubekwe kabusha
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

Lezi zibani ze-LED zephaneli eyisicaba zilungele amahhovisi, izibhedlela, izikole, iminyuziyamu, amagalari, izakhiwo zezentengiselwano, izindawo zezimboni, amagumbi enkomfa, amahholo okwamukela izivakashi, amakhaya, nokuningi.

Iphrojekthi yokufaka kabusha:

7. isibonelo sokufakwa kwephaneli eholwa kabusha

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

9. isibonelo sokufakwa kwephaneli eholayo emisiwe

Iphrojekthi Yokufaka Okufakwa Odongeni:

10. isibonelo sokufakwa kwephaneli led led

Okwedlule: 40W 2×2 2ftx2ft 0-10V Dimmable UL DLC LED Ceiling Panel Light

Olandelayo: 40W 2×4 2′ x 4′ Ukukhanya Kwephaneli Yesilingi ye-LED Drop Emisiwe

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka. Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni. Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED. Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni. Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: