Isibani Sephaneli Yophahla Ye-LED Esishintsha Umbala we-CCT Esilengayo 300*1200

I-CCT efinyezekayo isebenzisa isisombululo samandla aqhubekayo ukulungisa 'Umbala' wokukhanya okumhlophe kusuka ku-3000K kuya ku-6500K futhi okwamanje inomsebenzi wokukhanya ofinyezayo. Ingalawula ngasikhathi sinye nanoma yiliphi inani lezibani zephaneli le-LED ngokulawula okude kwe-RF okukodwa. I-remote can eyodwa isetha izibani zephaneli le-LED zamaqembu angu-99, futhi iqembu ngalinye alinamkhawulo wenani lezibani zephaneli. Ukulungisa okungenazinyathelo kanye nokulungisa okusheshayo kwezinyathelo ezine ukuze kube yinketho. Futhi akufinyezi. Isekela inzwa yokukhanya ukuze ifinyeze ukukhanya ngokuzenzakalelayo. Okwamanje, isekela nesikhathi sokusetha sokuvula/ukuvala.

Into:Isibani sephaneli ye-LED esikhanyayo esingu-300x1200 CCT

Amandla:60W

Okungancishiswa:I-CCT Elungisekayo Nokukhanya Okuncishisiwe

Izinga Lokushisa Lombala:Ingashintshwa kusukela ku-3000K kuya ku-6500K

Isikhathi Sokuphila:Amahora angu-≥50000

Sithumelele i-imeyili Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela Wokufaka

Icala Lephrojekthi

Icala Lephrojekthi:

1. UmkhiqizoIziciofI-30x120 CCT IyancishiswaI-LEDIphaneliUkukhanyat.

•Ukubukeka okulula, ukufakwa okulula, kungathatha indawo yokukhanya kwephaneli ye-grille yendabuko. Ukukhanya okuphezulu, ukusetshenziswa kwamandla aphansi, i-CRI ephezulu, ukukhanya okufanayo kanye nokungabikho kokukhanya. Kusetshenziswa i-aluminium enamandla aphezulu kanye ne-acrylic eqondisa ukukhanya okuphezulu.

•Isibani sephaneli yophahla lwe-CCT esingu-30*120cm sisebenzisa i-SMD2835 njenge-chip ye-LED, sinamandla aphezulu e-CRI angaphezu kwamahora angu-80,50000, kanye nombiko wokuhlolwa kwe-LM-80.

•Akukho ukufiphala kombala iminyaka engaphezu kwengu-20 uhlaka lwe-aluminium lwe-A6063, ikakhulukazi ukwakheka kwemibimbi ohlangothini olungcono ukushabalalisa ukushisa futhi kufune ukukhanya okulula.

•Uma ukukhanya kwemithombo yokukhanya kukhulu, ukukhanya kwakha indawo yokukhanya ekhanyayo.

•Ukushisa kombala kuyafiphazwa kanye nokukhanya kwesibani sephaneli se-LED esingu-295x1195 sinewaranti yeminyaka emi-3.

2. Imininingwane Yomkhiqizo:

Inombolo Yemodeli	I-PL-30120-60W-CCT	I-PL-60120-60W-CCT	I-PL-3030-25W-CCT
Ukusetshenziswa Kwamandla	60W	60W	25W
I-Luminous Flux (Lm)	4800～5400lm	4800～5400lm	2000～2250lm
Ubukhulu (mm)	295119510mm	595119510mm	29529510mm
Inani le-LED (ama-pcs)	240pcs	240pcs	210pcs
Uhlobo lwe-LED	I-SMD 2835
Izinga lokushisa lombala (K)	Ingancishiswa kusukela ku-3000K kuya ku-6500K
Umbala	Okumhlophe Okufudumele/Okumhlophe Kwemvelo/Okumhlophe Okumsulwa
I-Angle ye-Beam (izinga)	>120°
Ukusebenza Kahle Kokukhanya (lm/w)	>90lm/w
I-CRI	>80
Umshayeli we-LED	Umshayeli we-IC wamanje oqhubekayo
Isici Samandla	>0.9
I-Voltage yokufaka	I-AC 85V - 265V, 50 - 60Hz
Indawo Yokusebenza	Ngaphakathi
Izinto Zomzimba	I-Aluminium Frame + Mitsubishi LGP + PS Diffuser
Isilinganiso se-IP	I-IP20
Izinga Lokushisa Lokusebenza	-20°~65°
Indlela Efiphazekayo	Izinga lokushisa lombala nokukhanya kuyancishiswa
Inketho Yokufaka	Uphahla Olugobile/ Olulengisiwe/ Olungaphezulu/ Olubekwe Odongeni
Isikhathi sokuphila	Amahora angu-50,000
Iwaranti	Iminyaka emi-3

3.Izithombe Zokukhanya Kwephaneli Ye-LED:

2. Isibani Sephaneli Ye-LED Esicwebezelayo se-CCT esingu-1200x300

Isilawuli Esincibilikayo se-CCT:

1. Kungakapheli imizuzwana emi-3 isibani sikhanyisiwe, cindezela inkinobho yenombolo "1", bese ucindezela inkinobho ethi "ID", bese ucindezela inkinobho yenombolo "1" futhi bese ucindezela inkinobho ethi "ID" futhi njengesikhathi sokuqala. Uma ikhodi ifaniswe ngempumelelo, khona-ke ukukhanya kuzokhanya kanye;

2. Uma ufuna ukusetha isibani sesibili noma izibani zeqembu lesibili, ungacindezela inkinobho yenombolo "2", bese ucindezela inkinobho ethi "ID", bese ucindezela inkinobho yenombolo "2" futhi bese ucindezela inkinobho ethi "ID" futhi ngendlela efanayo. Lokhu kwenzelwa ukusetha inombolo yeqembu yezibani zephaneli ezihambisanayo;

3. Uma ufuna ukulawula ukukhanya kwenombolo "1" noma ukukhanya kwenombolo "1", vele ucindezele inkinobho yenombolo "1" ukuze ulungise ukukhanya noma izinga lokushisa lombala;

3. Umsebenzi Wokulawula Ongaguquki we-CCT

5. iphaneli ye-LED elungisekayo ye-cct engu-60x60

4. Isicelo:

Isibani se-LED Panel Light sisetshenziswa kabanzi ekukhanyiseni ngaphakathi endlini. Njengehhovisi, isibhedlela, ukumelana nokukhanya, isitolo esikhulu kanye nokukhanyisa ukudla njll.

Iphrojekthi Yokufaka Eqediwe:

10. iphaneli ye-LED emhlophe elungisekayo ye-cct

Iphrojekthi Yokufaka Okufakwe Ngaphezulu:

Iphaneli ye-LED engu-11. 30x120 cct dimming

Iphrojekthi Yokufaka Emisiwe:

12. iphaneli ye-LED ye-cct elengayo engu-30x120

Iphrojekthi Yokufaka Okufakwe Odongeni:

13. isibani sephaneli esifakwe odongeni se-LED

Okwedlule: Isibani Sokukhanya Sephaneli Ye-LED Esicwebezelayo esingu-3000K-6500K CCT 40W 62×62

Olandelayo: Isibani Sephaneli Ye-LED Esimhlophe Esikwazi Ukuthungwa Esingu-60W 1200×600 CCT 60×120

Umhlahlandlela Wokufaka:

Ngokukhanya kwephaneli ye-LED, kunezindlela zokufaka ezifakwe ophahleni, ezifakwe ebusweni, ezilengisiwe, ezifakwe odongeni njll. zezinketho ezinezesekeli zokufaka ezifanele. Ikhasimende lingakhetha ngokwezidingo zalo.

Ikhithi Yokumiswa:

Ikhithi yokumisa elengayo yephaneli ye-LED ivumela amaphaneli ukuthi alengayo ukuze abukeke kahle noma lapho kungekho khona uphahla lwegridi ye-T-bar yendabuko.

Izinto ezifakiwe ku-Suspended Mount Kit:

Izinto	I-PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Ikhithi Yohlaka Lokufaka Okungaphezulu:

Lolu hlaka lokukhweza olungaphezulu lufanelekile ukufaka izibani zephaneli ze-Lightman LED ezindaweni ezingenayo igridi yophahla olulengisiwe, njengebhodi le-plasterboard noma ophahleni lwekhonkrithi. Lulungele amahhovisi, izikole, izibhedlela njll. lapho ukukhweza okuphansi kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zohlaka oluya ophahleni. Iphaneli ye-LED ibe isifakwa ngaphakathi. Ekugcineni qedela ukufakwa ngokufaka izinhlangothi ezisele.

Uhlaka lokukhweza olungaphezulu lunobubanzi obanele bokufaka umshayeli we-LED, okufanele ubekwe maphakathi nephaneli ukuze kutholakale ukushabalaliswa okuhle kokushisa.

Izinto ezifakiwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6030	PL-SMK6060	I-PL-SMK6262	PL-SMK1230	PL-SMK1260
Ubukhulu Bohlaka	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Uhlaka A	L302 mm X 2 ama-pcs	L302mm X 2 ama-pcs	L602 mm X 2 ama-pcs	L622mm X 2 ama-pcs	L1202mm X 2 ama-pcs	L1202 mm X 2 ama-pcs
Uhlaka B	L305 mm X 2 ama-pcs	L305 mm X 2 ama-pcs	L605mm X 2 ama-pcs	L625 mm X 2 ama-pcs	L305mm X 2 ama-pcs	L605mm X 2 ama-pcs
	Ama-X 8 ama-pcs
	X 4 ama-pcs			Ama-pcs angu-X angu-6

Ikhithi Yokufaka Uphahla:

Ikhithi yokufaka ophahleni iklanyelwe ngokukhethekile, enye indlela yokufaka izibani zephaneli ze-SGSLight TLP ze-LED ezindaweni ezingenayo igridi yophahla olulengisiwe, njengebhodi le-plasterboard noma ophahleni lwekhonkrithi noma udonga. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukufakwa okuvaliwe kungenzeki khona.

Okokuqala faka iziqeshana ophahleni/odongeni, kanye neziqeshana ezihambisanayo nephaneli ye-LED. Bese uhlanganisa iziqeshana. Ekugcineni qedela ukufakwa ngokubeka idrayivu ye-LED ngemuva kwephaneli ye-LED.

Izinto ezifakiwe kuma-Ceiling Mount Kits:

Izinto	I-PL-SMC4				I-PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Iziqeshana zaseNtwasahlobo:

Iziqeshana zentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard enembobo eqoshiwe. Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukufakwa okuvalekile kungenzeki khona.

Okokuqala faka iziqeshana zesipilingi kuphaneli ye-LED. Iphaneli ye-LED ibe isifakwa emgodini osikiwe wophahla. Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED bese uqinisekisa ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto ezifakiwe: