I-KTV Lighting Flexible DC12V 18W RGB LED Panel Lights 60×30

I-RGB LED Panel light iwuhlobo lwamalambu okukhanyisa asendlini amahle futhi asezingeni eliphezulu, uhlaka lwawo lwangaphandle olwakhiwe nge-aluminum e-anodised, isibani sonke sihle futhi siwubukhazikhazi, aligcini nje ngokuba nomphumela omuhle wokukhanyisa, kodwa futhi lingaletha umuzwa omnandi.

Into:300x600 RGB LED Panel Light

Amandla:18W

I-Voltage esebenzayo:I-DC12V/DC24V

Kucimeke:Ukushintsha Umbala kwe-RGB Kuyacimeka

Ubude bempilo:≥50000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka

Icala lephrojekthi

Ividiyo Yomkhiqizo

1.Ukwethulwa Komkhiqizo we595x295mm RGB LED Panel Light 18w.

•Ngesilawuli se-RGB, iphaneli iyakwazi ukwenza ngendlela oyifisayo amamodi okushintsha umbala ngokulawula ukukhanya.Futhi i-led fixture inokusebenza kwe-DC12V noma i-24 V.

•Idizayini yethu yetheyiphu ye-rgb led ye-led yokukhanya kwephaneli ekhonjiwe ayifani nohlobo olujwayelekile lwe-rgb.Ububanzi bethu be-led strip edizayinelwe bungu-6mm obungenza ukukhanya kwephaneli ye-rgb led ibe mncane kakhulu njengogqinsi lwefreyimu yokukhanya yephaneli eholayo evamile.Idinga ama-84pcs SMD5050 led chips ukuze kuzuzwe ukukhanya okufanayo okufanayo.Futhi uma sicabangela isakhiwo sokukhanya kwephaneli eholayo, lapho siklama itheyiphu yethu ye-led strip, senza idizayini yethusi ephindwe kabili ngaphakathi, futhi senze izimbobo zethusi zibe ngaphezulu kakhulu futhi senze indawo yokushisela ibe nkulu ukuze sivumele ukudluliselwa kokushisa kuhlaka lwe-aluminium ngokushesha.

•Iphaneli yokukhanya eholwa yi-RGB isebenzisa i-Taiwan EPISTAR5050, izinga lokushisa libe ngu-80 degrees, ukwehla kokukhanya okuqondisiwe cishe ngo-3%.Futhi sisebenzisa ukwakheka okuhamba phambili kokulawula okushisayo, ukujiya kodonga lomzimba olupholisa okungu-3.0MM, ukuphakama okuphansi kwezinga lokushisa, okwandisa kakhulu impilo yesibani sonke.

2. Ipharamitha yomkhiqizo:

Imodeli No	I-PL-60120-48W-RGB	I-PL-3060-18W-RGB	I-PL-3030-18W-RGB
Ukusetshenziswa kwamandla	48W	18W	18W
Ubukhulu (mm)	595119511mm	29559511mm	29529511mm
Ubukhulu be-LED (ama-pcs)	182pcs	84pcs	84pcs
Uhlobo lwe-LED	I-SMD5050
Umbala	Imibala Eminingi
I-Beam Angle (degree)	> 120°
CRI	>80
Umshayeli we-LED	I-Constant Voltage LED Driver
I-Voltage ephumayo	I-DC12 / 24V
I-Voltage yokufaka	I-AC 85V - 265V, 50 - 60Hz
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	Uhlaka lwe-aluminium alloy kanye ne-PS Diffuser
Isilinganiso se-IP	IP20
Izinga Lokushisa Lokusebenza	-25°~70°
Indlela Ecimayo	Ukufiphala kwe-RGB
Inketho yokufaka	Kuhlehlisiwe/Kumisiwe/Kubekwe ngaphezulu
Ubude bempilo	Amahora angu-50,000
Iwaranti	3 Iminyaka

3.Izithombe Zokukhanya Kwephaneli ye-LED:

3. 295x595 rgb ukukhanya kwefasitelana led

2.4Ghz RGB Isilawuli nesikude:

•Isistimu yokulawula esebenziseka kalula.

•Sebenzisa isistimu yokulawula ye-2.4G Hz RGB, ikhono lokulwa nokuphazamiseka.

•Ngaphandle kokuphazamisana phakathi kwabalawuli.

•Ingakwazi ukulungisa ukukhanya nemibala ngesikhathi esifanayo.

• Izinhlobo ezingu-20 zamamodi amaningi akhanyayo atholakalayo.

•Ibanga lokulawula kude elingenantambo lingafinyelela kumamitha angama-25-30.

•Iphaneli yokuthinta yesilawuli kude ye-RF engenantambo ye-RGB.

6. I-DC24V RGB LED Panel Light Wiring Diagram

4. Isicelo sokukhanya kwephaneli ye-LED:

I-Multicolor RGB Dimming LED Panel Light yokukhanyisa ibha, izibani zeklabhu, izibani zangaphansi, izibani zesitolo, nokuningi.

7. Iphaneli engu-12v rgb ehamba phambili

Okwedlule: I-40W DMX 512 Surface Mounted RGB LED Panel Light 120x30cm

Olandelayo: I-infrared control Yellow Frame 18W Recessed RGB LED Panel Lamp 30×30

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	I-PL-SCK4				I-PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6030	I-PL-SMK6060	I-PL-SMK6262	I-PL-SMK1230	I-PL-SMK1260
Ubukhulu befreyimu	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Uhlaka A	L302 mm ama-x2 ama-pcs	L302mm ama-x2 ama-pcs	L602 mm ama-x2 ama-pcs	L622mm ama-x2 ama-pcs	L1202mm ama-x2 ama-pcs	L1202 mm ama-x2 ama-pcs
Uhlaka B	L305 mm ama-x2 ama-pcs	L305 mm ama-x2 ama-pcs	L605mm ama-x2 ama-pcs	L625 mm ama-x2 ama-pcs	L305mm ama-x2 ama-pcs	L605mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs			ama-x 6 ama-pcs

I-Ceiling Mount Kit:

Ikhithi yokukhweza usilingi iklanywe ngokukhethekile, enye indlela yokufaka izibani zephaneli ye-SGSLight TLP LED ezindaweni ezingenawo igridi yosilingi emisiwe, njengebhodi elikhonjiwe noma usilingi kakhonkolo noma udonga.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka iziqeshana ophahleni / odongeni, kanye neziqeshana ezihambisanayo kuphaneli ye-LED.Bese ubhangqa iziqeshana .Ekugcineni qedela ukufaka ngokubeka umshayeli we-LED ngemuva kwephaneli ye-LED.

Izinto ezifakwe ku-Ceiling Mount Kits:

Izinto	I-PL-SMC4				I-PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: