125lm/w 30W 1-10V Dimmable UL CUL 2x2ft LED Flat Panel Light

Idizayini yezindawo zezakhiwo iya ngokuya ihlanganisa izici ezikhanyayo ngezinjongo zokuhlobisa noma zokusebenza.Ngokukhanya okuhlehlisiwe, iningi lesistimu yokukhanyisa ilahlwa ngemuva kakhulu noma lihlehliswe endaweni yezakhiwo noma isici (njenge-soffit).Ukuthuthukiswa kwamaphaneli e-LED anokukhanya onqenqemeni kuhambisana nokulinganisa ubudlelwano bezinto ezingenhla ukuze kufezwe okuthile okudala ukuphuma kokukhanya okubonakala kuhambisana neso lomuntu kulo lonke iphaneli ye-diffuser.

Into:Ukukhanya Kwephaneli ye-LED engu-2x2ft

Amandla:30W / 40W / 50W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka

Icala lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 2x2I-LEDIphaneliUkukhanya30W.

•Ukusebenza kahle okukhanyayo ngu-100 lm/w-125lm/w okonga amandla afika ku-50% uma kuqhathaniswa nezinto ezivamile ze-fluorescent.

•Iphrofayili esezingeni eliphansi enhle (uzimele omncane ongu-10mm) wemiqondo emisha yedizayini yokukhanyisa.

•Idizayini yesekethe ehlukile ukugwema noma iyiphi inkinga ngokuphuma kokukhanya okubangelwa noma okuthonywe i-LED eyodwa enephutha.

•UGR 19 (Unified Glare Rating) - ilungele ukusetshenziswa emahhovisi.

•120°wide beam angle yokusabalalisa ukukhanya okulinganayo.

•Ukufakwa okungenazinkinga - kulungele izinhlelo zokusebenza ezihlehlisiwe, ezimisiwe, ezingaphezulu noma ezifakwe odongeni.

•Ayikho i-mercury noma ezinye izinto eziyingozi;Akukho ukuphazamiseka kwe-RF.

•Impilo ende kakhulu ifinyelela emahoreni angu-60,000, izikhathi eziyishumi kuya kusibani esivamile sokulondoloza amandla.

•Kugunyazwe i-UL CUL DLC ne-FCC.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-2x2-30W-100	PL-2x2-30W-125	PL-2x2-40W-100	PL-2x2-40W-125	PL-2x2-50W-100
Imodeli ye-UL/DLC	ET-22-30WD-100	ET-22-30WD-125	ET-22-40WD-100	ET-22-40WD-125	ET-22-50WD-100
Ukusetshenziswa kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	603x603x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga lokushisa lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux(Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Beam Angle (degree)	> 120°
CRI	>80
Isici samandla	>0.9
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame+ LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Kufiphele	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Udonga Lubekwe kabusha
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

Lezi zibani ze-LED zephaneli elincane eliyisicaba zilungele amahhovisi, izibhedlela, izikole, iminyuziyamu, amagalari, izakhiwo zezentengiselwano, izindawo zezimboni, amagumbi enkomfa, amahholo okwamukela izivakashi, amakhaya, nokuningi.

Iphrojekthi yokufaka kabusha:

7. isibonelo sokufakwa kwephaneli eholwa kabusha

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

9. isibonelo sokufakwa kwephaneli eholayo emisiwe

Iphrojekthi Yokufaka Okufakwa Odongeni:

10. isibonelo sokufakwa kwephaneli led led

Okwedlule: Osayizi Abajwayelekile base-USA 30W 2×2 Recessed UL LED Ceiling Panel Light

Olandelayo: I-Lifud 40W 24x24inch UL ETL LED Flat Ceiling Panel Light 2′x2′

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: