I-Lifud 40W 24x24inch UL ETL LED Flat Ceiling Panel Light 2′x2′

Lawa maphaneli atholakala ebangeni lokushisa lombala kusuka ku-3000K kuya ku-6000K ngekhwalithi yombala ye-CRI 80 ephakeme kakhulu.Ngokusebenza okuphelele okufiphele, futhi ihambisana nezilawuli zesakhiwo, izinzwa ezinyakazayo, izibali sikhathi, namasistimu okuvuna emini.Le modeli ifaneleka yi-UL ne-DLC.Isekelwa iwaranti yeminyaka emi-5/50,000 yamahora wempilo ende yesevisi yamahhala.

Into:Ukukhanya Kwephaneli ye-LED engu-2x2ft

Amandla:30W / 40W / 50W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka

Icala lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 2x2ftI-LEDIphaneliUkukhanya40W.

•Uhlobo lokukhanya: ngenqubo yokuncipha ephansi ehlanganisa ukukhanya okumhlophe okungu-2835LED.

•Imithombo yokukhanyisa isatshalaliswa ngokulinganayo esisekelweni sokukhanya, futhi inikeza izibani zesibili ku-PS diffuser ngokusebenzisa ilensi, ukuvimbela ukuvuza kokukhanya nesithunzi kuhlaka kanye nesikhala esimnyama sokukhanya kwephaneli ye-LED eseceleni.

•Ukunikezwa kwamandla: amandla angashintshi, ukuvikelwa kwamandla angaphezu kwamanje, amandla kagesi angaphezulu, kanye nezinga lokushisa eliphezulu ukuze kuqinisekiswe ukusebenza okuzinzile komkhiqizo.

•Umphumela wokukhanya ophelele, ukuqala ngokushesha, ukusetshenziswa kwamandla okuphansi, akukho ultraviolet nemisebe ye-infrared.

•Ukufakwa okulula nokusetshenziswa okuvamile, ukushintshwa okuqondile kwesibani sendabuko nokugcinwa okuphansi.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-2x2-30W-100	PL-2x2-30W-125	PL-2x2-40W-100	PL-2x2-40W-125	PL-2x2-50W-100
Imodeli ye-UL/DLC	ET-22-30WD-100	ET-22-30WD-125	ET-22-40WD-100	ET-22-40WD-125	ET-22-50WD-100
Ukusetshenziswa kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	603x603x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga lokushisa lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux(Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Beam Angle (degree)	> 120°
CRI	>80
Isici samandla	>0.9
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame+ LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Kufiphele	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Udonga Lubekwe kabusha
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

Lezi zibani ze-LED zephaneli elincane eliyisicaba zilungele amahhovisi, izibhedlela, izikole, iminyuziyamu, amagalari, izakhiwo zezentengiselwano, izindawo zezimboni, amagumbi enkomfa, amahholo okwamukela izivakashi, amakhaya, nokuningi.

Iphrojekthi yokufaka kabusha:

7. isibonelo sokufakwa kwephaneli eholwa kabusha

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

9. isibonelo sokufakwa kwephaneli eholayo emisiwe

Iphrojekthi Yokufaka Okufakwa Odongeni:

10. isibonelo sokufakwa kwephaneli led led

Okwedlule: 125lm/w 30W 1-10V Dimmable UL CUL 2x2ft LED Flat Panel Light

Olandelayo: 125lm/w 40W 2ftx2ft 0-10V Dimmable UL DLC LED Ceiling Panel Light

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: