Izigaba zemikhiqizo
1. UmkhiqizoIziciof 1x4I-LEDIphaneliUkukhanya50w.
•Idizayini encane kakhulu, yonga amandla angu-80%, ukusebenza kahle okuphezulu okungu-125lm/w ngokukhanya okufana neyunifomu.
•Idizayini ekhethekile ye-PCB, i-aluminium esekelwe, ama-SMD2835 LEDs anezitifiketi ze-LM-80, anokunciphisa ukukhanya okuphansi ngemva kwamahora angu-60,000 okusebenza.
•Ibhokisi lokuhlangana lomshayeli oholayo, elidizayinelwe ngokukhethekile imakethe yaseNyakatho Melika, liphumelele izinga le-UL.
•4pcs noma 6pcs hook yokuzamazama komhlaba, vikela ekuwisweni.
•Ukukhanya okulinganayo, akukho ndawo, akukho ukukhanya, akukho ndawo emnyama.Ukusebenza kahle kwe-lumen ephezulu, kungenza i-100 ~ 125lm/W ngokusho kwesicelo.
•Ukuvikelwa kwemvelo: ayikho i-mercury yensimbi eyingozi.akukho-radiation, anti-interference eqinile.
2. Ukucaciswa komkhiqizo:
Imodeli No | PL-1x4-30W-100 | PL-1x4-30W-125 | PL-1x4-40W-100 | PL-1x4-40W-125 | PL-1x4-50W-100 |
Imodeli ye-UL/DLC | ET-14-30WD-100 | ET-14-30WD-125 | ET-14-40WD-100 | ET-14-40WD-125 | ET-14-50WD-100 |
Ukusetshenziswa kwamandla | 30W | 30W | 40W | 40W | 50W |
Ubukhulu (mm) | 303x1213x10mm | ||||
Uhlobo lwe-LED | I-SMD2835 | ||||
Izinga lokushisa lombala(K) | 3000K/4000K/5000K/6000K | ||||
I-Luminous Flux(Lm/w) | 100-125lm/w | ||||
I-Voltage yokufaka | I-AC 100V – 277V, 50 - 60Hz | ||||
I-Beam Angle (degree) | > 120° | ||||
CRI | >80 | ||||
Isici samandla | >0.9 | ||||
Indawo Yokusebenzela | Ngasendlini | ||||
Impahla Yomzimba | I-Aluminium Frame+ LGP + PS/PMMA Diffuser | ||||
Isilinganiso se-IP | IP20 | ||||
Kufiphele | 0~10V(UL) | ||||
Izinga Lokushisa Lokusebenza | -20°~65° | ||||
Inketho yokufaka | Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Intaba Yodonga | ||||
Ubude bempilo | Amahora angu-60,000 | ||||
Iwaranti | 5 Iminyaka |
3. Izithombe Zokukhanya Kwephaneli ye-LED:
4. Isicelo sokukhanya kwephaneli ye-LED:
I-LED Panel Light inokubukeka kwemfashini, ingafakwa isicelo sokuhlobisa kanye nesicelo sokukhanyisa.Ingafakwa odongeni, ophahleni, ophahleni oluhlanganisiwe, uphahla lwe-grille.Kubanzi okwekhishi, ihhovisi, ihhotela, isibhedlela, icinema, imakethe, isitolo, igumbi lokugeza, iphasishi, ilifti, imoto, ikhawunta, ibha, igalari, imnyuziyamu njll.
Iphrojekthi yokufaka kabusha:
Iphrojekthi ekhwezwe phezu komhlaba:
Iphrojekthi Yokufaka Emisiwe:
Iphrojekthi Yokufaka Okufakwa Odongeni:
Umhlahlandlela wokufaka:
Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.
Ikhithi yokumiswa:
Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.
Izinto ezifakwe Kukhithi Emisiwe Yentaba:
Izinto | PL-I-HPA4 | I-PL-HPA8 | ||||
6060 | 3012 | 6012 | ||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 4 | X 8 |
Ikhithi ye-Surface Mount Frame:
Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.
Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.
Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.
Izinto ezifakwe ku-Surface Mount Frame Kit:
Izinto | I-PL-SMK3030 | I-PL-SMK6363 | I-PL-SMK1233 | I-PL-SMK1263 | |
Ubukhulu befreyimu | 310x313x50mm | 610x613x50mm | 1220x313x50mm | 1220x613x50mm | |
L310 mm | L610mm | L1220mm | L1220mm | ||
L310mm | L613mm | L313mm | L613mm | ||
ama-x8 ama-pcs | |||||
ama-x4 ama-pcs | ama-x 6 ama-pcs |
Iziqeshana zasentwasahlobo:
Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.
Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.
Izinto zifakiwe:
Izinto | I-PL-CPA4 | I-PL-CPA8 | ||||
6060 | 3012 | 6012 | ||||
X 4 | X 8 | |||||
X 4 | X 8 |
Ukukhanyisa kwenkulisa (Germany)
Ukukhanyisa Esibhedlela (Germany)
Ukukhanyisa kwehhovisi (Germany)
Ukukhanyisa kwe-Subway (China)