I-Ultra Slim 30W Square UL LED Surface Panel Light Fixture 1ft x 4ft

Ithuthukiswe ngesizukulwane sakamuva sokukhanyisa kwesimo esiqinile kanye nobuchwepheshe bomshayeli we-elekthronikhi, lesi sibani sephaneli ye-LED engu-1′×4′ simi ngaphezu komncintiswano ngokuhlinzeka ngokwakha okusebenza kahle kakhulu okukhanyisa onqenqemeni okwandisa ukusebenza nokuthuthukisa ukonga konke kwamandla.

Into:Ukukhanya Kwephaneli ye-LED engu-1x4ft

Amandla:30W / 40W / 50W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

1. UmkhiqizoIziciof 1x4I-LEDIphaneliUkukhanya30W.

• Iphaneli ye-LED eyonga amandla ihlala isikhathi eside izikhathi ezi-5 kunamaphaneli e-fluorescent, Isebenza phakathi kwebanga elibanzi elingu-100-277 VAC.

•Isebenzisa i-6063 - i-aluminium ye-T5 yesakhiwo, eqinisekisa ukuthi indawo engaphezulu ayigqwali, futhi inomsebenzi wokudlulisa ophezulu we-thermal conductivity.

•Ukukhanya kunikeza ukukhanya kwe-ceiling accent lighting, Okusebenzisekayo ukukhanyisa phansi kanyekanye.Ilensi yayo ye-polycarbonate ekhanyelayo enesikhungo esiyisithwathwa siletha, ukukhanya okubushelelezi ngaphandle kwama-bulb abonakalayo noma izindawo ezishisayo.

•Ubukhulu obutholakalayo (mm): 2x4 ft (40w 50w 60w), 1x4 ft (30w 40w 50w), 2x2 ft (30w 40w 50w) ukukhanya kwephaneli yeled.

•Umshayeli we-PF ephezulu, PF>0.9, umshayeli omusha osebenza kahle kakhulu wamanje.

•Kulula ukufaka nokukhipha.Indlela yokufaka isibani sephaneli eholayo, kukhona okuhlehlisiwe, okumisiwe, okufakwe phezulu kanye nodonga olutholakalayo.

•Long Lifespan 60,000 hrs kanye nezindleko zokulungisa eziphansi kakhulu.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-1x4-30W-100	PL-1x4-30W-125	PL-1x4-40W-100	PL-1x4-40W-125	PL-1x4-50W-100
Imodeli ye-UL/DLC	ET-14-30WD-100	ET-14-30WD-125	ET-14-40WD-100	ET-14-40WD-125	ET-14-50WD-100
Ukusetshenziswa kwamandla	30W	30W	40W	40W	50W
Ubukhulu (mm)	303x1213x10mm
Uhlobo lwe-LED	I-SMD2835
Izinga lokushisa lombala(K)	3000K/4000K/5000K/6000K
I-Luminous Flux(Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Beam Angle (degree)	> 120°
CRI	>80
Isici samandla	>0.9
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame+ LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Kufiphele	0~10V(UL)
Izinga Lokushisa Lokusebenza	-20°~65°
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Intaba Yodonga
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

I-UL LED Panel Light iyindlela efanelekile yokumiselela izinto ezisebenza ngogesi ezisebenza kahle emahhovisi, ezikoleni, ezivakashini, ekunakekelweni kwezempilo, nakwezinye izimakethe nezinhlelo zokusebenza zezimboni ezidinga ukujula kokufakwa okuncane.

Iphrojekthi yokufaka kabusha:

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

10. 1200x300 ukukhanya kwephaneli eholayo

Iphrojekthi Yokufaka Okufakwa Odongeni:

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: