50W 2ftx4ft Recessed UL DLC LED Flat Panel Lamp 600×1200

Lawa maphaneli angu-2×4 aholwayo afaka i-engeli ebanzi ye-beam enokukhanya okusebenziseka kalula okunamandla amancane uma kuqhathaniswa nokufakwa kwe-fluorescent futhi atholakala ebangeni lokushisa lombala osuka ku-3000K, 4000K, 5000K no-6000K ngekhwalithi yombala ye-CRI 80 ephakeme kakhulu.Zenzelwe ukuthi zihlale kumagridi amaningi osilingi ajwayelekile, noma zingagxunyekwa phezulu ophahleni nasezindongeni noma zisetshenziswe njengamalengalenga.

Into:Ukukhanya Kwephaneli ye-LED engu-2x4ft

Amandla:40W / 50W / 60W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka

Icala lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 2x4I-LEDIphaneliUkukhanya50W.

•Isibani sephaneli ye-Lightman 2x4 eholayo sisebenzisa i-SMD led chip ngaphakathi, ukukhanya okuphezulu okukhiphayo 100lm/w-125lm/w, CRI>80 ephezulu.

•Iphaneli yokukhanya eholwa ngu-2x4 ft isebenzisa isikhunta esiyingqayizivele ngokuphelele, yenza ukukhanya kwakho kukhetheke futhi kube kumnandi.Idizayini entsha ephephile, iphephile ngo-100%, ayikho ingozi.

•Okwe-UL DLC esohlwini lwe-led led panel light, 2x4 ft(603x1213mm), 1x4ft(303x1213mm) 2x2 ft(603x603mm) ayatholakala.

•2x4 ukukhanya kwephaneli elengayo elengayo kuno-40w 50w no-60w ngezinketho.Futhi ukukhanya kwephaneli eholwa ngu-50 60x120 kunokukhanya okuphezulu okusebenzayo ngo-125lm/w.

•Kukhona izindlela zokufaka: i-recessed, i-surface igxunyekwe, imisiwe futhi ifakwe odongeni zonke ziyatholakala.

•Ngaphezu kwamanje, phezu kwe-voltage, ukushisa kakhulu, ukuvikela ukuduma kwezulu.

•Ngomshayeli oholayo, ohambisana ne-UL, DLC, akukho-flicker ngesikhathi sokusebenza, ukuphendula okusheshayo.

•I-UL led panel light 600x1200 impilo yokuphila ingaphezu kwamahora angu-60000.

•Kulambu lephaneli eliyisicaba le-LED, ukujiya okungu-10mm kuphela, ukuguquguquka okungcono kwedizayini futhi kunika amandla i-spectrum ebanzi yamasu okukhanyisa kanye nokudlulisa ukukhanya okuphezulu.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-2x4-40W-125	PL-2x4-50W-100	PL-2x4-50W-125	PL-2x4-60W-100
Imodeli ye-UL/DLC	ET-24-40WD-125	ET-24-50WD-100	ET-24-50WD-125	ET-24-60WD-100
Ukusetshenziswa kwamandla	40W	50W	50W	60W
Ukusebenza Okukhanyayo	100lm/w-125lm/w
Ubukhulu (mm)	603x1213x10mm
Izinga lokushisa lombala (K)	3000K/4000K/5000K/6000K
Uhlobo lwe-LED	Idatha ye-SMD2835
I-Voltage yokufaka	I-AC100-277V, 50/60Hz
I-Beam Angle (degree)	> 120°
CRI	> 80Ra
Isici samandla	>0.95
I-THD	<15%
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame + Mitsubishi LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Izinga Lokushisa Lokusebenza	-20°~65°
Kufiphele	0~10V(UL)
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Intaba Yodonga
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

Kumalambu ephaneli eholwayo, alungele iphasishi, iphasishi, igumbi lokuhlala, igumbi lokuhlangana, ihhovisi, isitolo, imakethe enkulu, umbukiso, noma okunye ukusetshenziswa kwekhaya nezohwebo.

Iphrojekthi yokufaka kabusha:

7. isibonelo sokufakwa kwephaneli eholwa kabusha

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

9. isibonelo sokufakwa kwephaneli eholayo emisiwe

Iphrojekthi Yokufaka Okufakwa Odongeni:

10. isibonelo sokufakwa kwephaneli led led

Okwedlule: 50W 603×1213 Surface Mounted UL DLC LED Flat Panel Lamp

Olandelayo: LM-79 60W 4′x2′ 0-10V Dimming Square LED Office Ceiling Panel Light 2x4ft

Umhlahlandlela wokufaka:

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: