50W 603×1213 Surface Mounted UL DLC LED Flat Panel Lamp

Lawa maphaneli angu-2×4 aholwayo afaka i-engeli ebanzi ye-beam enokukhanya okusebenziseka kalula okunamandla amancane uma kuqhathaniswa nokufakwa kwe-fluorescent futhi atholakala ebangeni lokushisa lombala osuka ku-3000K, 4000K, 5000K no-6000K ngekhwalithi yombala ye-CRI 80 ephakeme kakhulu.Zenzelwe ukuthi zihlale kumagridi amaningi osilingi ajwayelekile, noma zingagxunyekwa phezulu ophahleni nasezindongeni noma zisetshenziswe njengamalengalenga.

Into:Ukukhanya Kwephaneli ye-LED engu-2x4ft

Amandla:40W / 50W / 60W

I-Voltage Yokufaka:I-AC100-277V, 50-60Hz

Izinga lokushisa lombala:3000K /4000K /5000K /6000K

Ubude bempilo:≥60000 Amahora

Thumela i-imeyili kithi Landa njenge-PDF

Izigaba zemikhiqizo

Imininingwane Yomkhiqizo

Umhlahlandlela wokufaka:

Icala lephrojekthi

Ividiyo yomkhiqizo

1. UmkhiqizoIziciof 2x4I-LEDIphaneliUkukhanya50W.

• Uhlaka lwe-aluminium oluqinile lunikeza amandla nokufana.

•Iphrofayili esezingeni eliphansi enhle (uzimele omncane ongu-10mm) wemiqondo emisha yedizayini yokukhanyisa.

•Ama-optics athuthukisiwe anika amandla iphaneli eyisicaba ukuthi ihlangabezane nezidingo zokuxhopha okuphansi.

•Ijazi lempushana elibonisa ukukhanya okuphezulu (91%) lifake ukukhiqizwa kokuthunyelwe ukuze kuphele isikhathi eside.

•Izishayeli ezisebenza kahle kakhulu nezingacwayizi.

•120°wide beam angle yokusabalalisa ukukhanya okulinganayo.

•Inobungani nemvelo, ukushisa okuphansi, akukho misebe ye-IR noma ye-UV, ukusetshenziswa kwamandla okuphansi, ukonga amandla (ingangonga kufika ku-80%).

•Akukho ukuphazamiseka kwe-RF, ukukhanya okukhanyayo nokuthambile, okungavikela amehlo akho nobuchopho

•Ikhwalithi ephezulu nempilo ende yesevisi, ingakhanyisa kufika ku-60,000hrs.

2. Ukucaciswa komkhiqizo:

Imodeli No	PL-2x4-40W-125	PL-2x4-50W-100	PL-2x4-50W-125	PL-2x4-60W-100
Imodeli ye-UL/DLC	ET-24-40WD-125	ET-24-50WD-100	ET-24-50WD-125	ET-24-60WD-100
Ukusetshenziswa kwamandla	40W	50W	50W	60W
Ukusebenza Okukhanyayo	100lm/w-125lm/w
Ubukhulu (mm)	603x1213x10mm
Izinga lokushisa lombala (K)	3000K/4000K/5000K/6000K
Uhlobo lwe-LED	Idatha ye-SMD2835
I-Voltage yokufaka	I-AC100-277V, 50/60Hz
I-Beam Angle (degree)	> 120°
CRI	> 80Ra
Isici samandla	>0.95
I-THD	<15%
Indawo Yokusebenzela	Ngasendlini
Impahla Yomzimba	I-Aluminium Frame + Mitsubishi LGP + PS/PMMA Diffuser
Isilinganiso se-IP	IP20
Izinga Lokushisa Lokusebenza	-20°~65°
Kufiphele	0~10V(UL)
Inketho yokufaka	Uphahla Lumisiwe kabusha/ Lumisiwe/ Ubuso/ Intaba Yodonga
Ubude bempilo	Amahora angu-60,000
Iwaranti	5 Iminyaka

3. Izithombe Zokukhanya Kwephaneli ye-LED:

4. Isicelo sokukhanya kwephaneli ye-LED:

Ukulungiswa kokukhanya kwephaneli eholwa yi-Lightman kusetshenziswa kabanzi Indawo yokudlela, Ihhotela, Isuphamakethe, Igumbi Lombukiso, Amagumbi Omhlangano, Amafekthri, Amahhovisi, Izakhiwo Zezentengiselwano, Ihholo Lombukiso, Isikole, Isibhedlela, Amakilasi, Ipaki Elingaphansi Komhlaba njll izindawo lapho kudingeka ukonga amandla kanye nokukhanyisa kwenkomba enikeza umbala ophezulu. .

Iphrojekthi yokufaka kabusha:

7. isibonelo sokufakwa kwephaneli eholwa kabusha

Iphrojekthi ekhwezwe phezu komhlaba:

Iphrojekthi Yokufaka Emisiwe:

9. isibonelo sokufakwa kwephaneli eholayo emisiwe

Iphrojekthi Yokufaka Okufakwa Odongeni:

10. isibonelo sokufakwa kwephaneli led led

Okwedlule: 125lm/w 40W Iphaneli ye-LED Drop Ceiling Emisiwe Ukukhanya 2×4

Olandelayo: 50W 2ftx4ft Recessed UL DLC LED Flat Panel Lamp 600×1200

Umhlahlandlela wokufaka

Ngokukhanya kwephaneli eholayo, kukhona ukuhlehliswa kosilingi, okufakwe ngaphezulu, ukufakwa okumisiwe, okufakwe odongeni njll izindlela zokufaka zezinketho ezinezinsiza ezihambisanayo zokufaka.Ikhasimende lingakhetha ngokuvumelana nezidingo zabo.

Ikhithi yokumiswa:

Ikhithi yokukhweza emisiwe yephaneli ye-LED ivumela amaphaneli ukuthi amiswe ukuze abukeke kahle kakhudlwana noma lapho ungekho usilingi wegridi ye-T-bar yendabuko.

Izinto ezifakwe Kukhithi Emisiwe Yentaba:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi ye-Surface Mount Frame:

Lolu hlaka lokukhweza phezulu lulungele ukufaka izibani zephaneli ye-Lightman LED ezindaweni ezingenawo igridi yosilingi emisiwe, njenge-plasterboard noma usilingi kakhonkolo.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala faka izinhlangothi ezintathu zefreyimu ophahleni.Iphaneli ye-LED ibe isishelela phakathi. Ekugcineni qedela ukufakwa ngokukrufusha uhlangothi olusele.

Uhlaka lokukhweza okungaphezulu kunokujula okwanele ukuze kungene umshayeli we-LED, okufanele abekwe phakathi nendawo yephaneli ukuze uthole ukulahlwa kahle kokushisa.

Izinto ezifakwe ku-Surface Mount Frame Kit:

Izinto	I-PL-SMK3030	I-PL-SMK6363		I-PL-SMK1233	I-PL-SMK1263
Ubukhulu befreyimu	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Uhlaka A	L310 mm ama-x2 ama-pcs	L610mm ama-x2 ama-pcs		L1220mm ama-x2 ama-pcs	L1220mm ama-x2 ama-pcs
Uhlaka B	L310mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs		L313mm ama-x2 ama-pcs	L613mm ama-x2 ama-pcs
	ama-x8 ama-pcs
	ama-x4 ama-pcs		ama-x 6 ama-pcs

Iziqeshana zasentwasahlobo:

Iziqeshana zasentwasahlobo zisetshenziselwa ukufaka iphaneli ye-LED ophahleni lwe-plasterboard ngembobo yokusika.Ilungele amahhovisi, izikole, izibhedlela njll. lapho ukukhwezwa kabusha kungenzeki khona.

Okokuqala xhuma iziqeshana zasentwasahlobo kuphaneli ye-LED.Iphaneli ye-LED bese ifakwa emgodini osikiwe ophahleni.Ekugcineni qedela ukufakwa ngokulungisa indawo yephaneli ye-LED futhi uqiniseke ukuthi ukufakwa kuqinile futhi kuphephile.

Izinto zifakiwe: